# Limit Order

> A limit order buys or sells only at your price or better. Learn how limit orders fill, why they can miss trades, and how to measure the trade-off in R.

Canonical: https://www.journalx.io/glossary/limit-order

A **limit order** tells your broker the worst price you are willing to accept. A buy limit at $49.80 will fill at $49.80 or lower, and never higher. A sell limit at $51.00 will fill at $51.00 or higher, and never lower. You get control over the price, and you give up the certainty that the trade happens at all.

That is the mirror image of a [market order](/glossary/market-order), which fills almost every time but at whatever price is available. Most [take-profit](/glossary/take-profit) exits are limit orders, and many planned entries are too.

## How a Limit Order Works

FINRA defines a limit order as "an order to buy or sell a security at or better than a specified price." In its words, "a buy limit order can be executed only at or below the limit price; a sell limit order can be executed only at or above the limit price," so "you're guaranteed to get your limit price or a better price if your order is executed. However, there's a chance your order doesn't get executed at all" ([FINRA, Understanding Order Types](https://www.finra.org/investors/alerts/understanding-order-types-can-save-time-and-money)).

Where you place the limit decides how it behaves:

- **Below the market (for a buy).** With a stock at $50.00, a buy limit at $49.80 rests on the order book and waits. It fills only if sellers come down to $49.80.
- **At or above the ask (for a buy).** A buy limit at $50.10 with the ask at $50.02 is called a **marketable limit order**. It fills right away, like a market order, but it stops at $50.10. If the shares offered run out before that price, the rest of the order waits instead of filling at $50.15 or $50.20.

Sell limits work the other way around: above the market they wait, and at or below the bid they fill immediately, down to the limit and no further.

## Why Touching Your Price Is Not a Fill

A resting limit order joins a queue. Most exchanges match orders by price first and then by time, often called price-time priority or first in, first out ([order matching systems](https://en.wikipedia.org/wiki/Order_matching_system)). If 20,000 shares were already bid at $49.80 when your 300 shares arrived, all of those shares are ahead of you.

So price can trade at $49.80, fill the orders at the front of the queue, and bounce, while your order sits unfilled. A fill is close to certain only when price trades through your level, to $49.79 or lower for a buy.

Two related effects:

- **Partial fills.** If only some of the shares at your price trade, you get part of your order. A 1,000-share limit can end up as 300 shares, which changes your position size and your dollar risk.
- **Time in force.** A day order expires at the end of the session. A good-til-canceled (GTC) order stays open until it fills or you cancel it, though many brokers cancel these after a set period. FINRA notes that "some limit orders include a time limit within which the trade must be placed."

## The Trade-Off: Better Prices, Missed Trades

A limit entry gets you a better price on the trades that fill. The cost is the trades that never fill, and which trades those tend to be.

![Three outcomes for a buy limit at $49.80 with the stock at $50.00, where the order fills and the trade works, the price never comes back and the move is missed, or the order fills and price keeps falling to the $49.30 stop](https://assets.journalx.io/marketing/glossary/limit-order/limit-order-three-outcomes.avif)

The chart shows a buy limit at $49.80 placed with the stock at $50.00. The same order can play out three ways:

1. **Price dips to $49.80 and turns up.** You fill at a good price and the trade works. This is the outcome traders picture when they place the order.
2. **Price never comes back.** It runs higher from $50.00 and you are not in. A market order would have caught the move.
3. **Price slices through $49.80 and keeps falling.** Your order fills easily, because sellers are pushing through your level, and the trade goes straight to its stop.

The uncomfortable part is that the third case fills more reliably than the first. A patient limit order tends to fill on the trades that keep going against you and miss some of the strongest moves in your favor. This is known as adverse selection.

**A worked example in R.** Suppose your stop is $0.50 away, so 1R is $0.50 per share, and a limit order typically gets you in 10 cents better than a market order. That saves 0.2R on every filled trade, or 6R across 30 fills. If the same patience means missing two trades that would each have made 3R, that is 6R given back, and the saving is gone. Measured in [R-multiples](/glossary/r-multiple), the question is whether the price you save is worth more than the winners you miss, and only your own records can answer it.

A limit order's results include the trades it missed. If you only review filled trades, the limit entry will always look better than it is.

## Limit Order vs Market Order vs Stop-Limit

| Order                                          | Guarantees                             | Risk                                              | Typical use                                   |
| ---------------------------------------------- | -------------------------------------- | ------------------------------------------------- | --------------------------------------------- |
| Limit order                                    | Your price or better                   | No fill, or a partial fill                        | Planned entries, profit targets, thin markets |
| [Market order](/glossary/market-order)         | A fill (in a liquid market)            | Spread and [slippage](/glossary/slippage)         | Exits that must happen                        |
| [Stop-limit order](/glossary/stop-limit-order) | No worse than the limit once triggered | Left in the position if price gaps past the limit | Stops where a bad fill is the bigger worry    |

A stop-limit order is a limit order that only activates when a trigger price is hit. The [stop-loss](/glossary/stop-loss) entry covers why that can leave a losing position open in a fast move.

## When Traders Use Limit Orders

- **Profit targets.** A sell limit above a long entry closes the trade at the target or better, which is why take-profit orders are usually limits.
- **Planned entries.** Setups that buy a pullback to a level fit a resting limit at that level, written down in the [pre-trade plan](/glossary/pre-trade-plan) before the order goes in.
- **Thin or wide-spread markets.** In a small-cap stock, an illiquid option or a minor crypto pair, a limit order (or a marketable limit) stops one order from walking far through the book.
- **Extended hours.** FINRA notes that firms "might only accept limit orders during extended-hours trading," a session where liquidity is lower and an order "may be executed partially or not at all" ([FINRA, Extended-Hours Trading](https://finra.org/investors/insights/extended-hours-trading)).

## Key Takeaways

- A limit order fills only at your price or better. It guarantees the price, not the fill.
- Price touching your limit is not a fill. Orders queue by price and then time, and only a trade through your level makes a fill close to certain.
- Limit entries tend to fill on trades that keep moving against you and miss some that run in your favor.
- Judge limit entries in R, including the trades that never filled.
- Limit orders suit profit targets, planned entries, thin markets and extended hours.

## Common Mistakes

**Assuming a touch is a fill in backtests.** A backtest that fills every limit as soon as price touches it overstates results, because in live trading the order at the back of the queue often misses. A stricter test requires price to trade through the limit. Our guide on [how to backtest a trading strategy](/guides/how-to-backtest-a-trading-strategy) covers this and other fill assumptions.

**Chasing with the limit.** Moving a buy limit up a few cents at a time as price runs away is a slow market order with worse timing. Decide in advance whether a missed entry is acceptable.

**Forgetting open orders.** A GTC limit left on a stock you have stopped watching can fill weeks later, in a market that no longer fits the plan.

**Ignoring partial fills.** A partly filled entry changes the position size, and your stop and target may still be sized for the full order.

**Reviewing only filled trades.** If missed entries are not recorded, a limit-entry strategy's numbers are built only from the trades that came to you, and the cost of the missed winners never shows up.

## How JournalX Tracks Limit Orders

Judging a limit entry needs both sides: the fills and the trades that never filled. JournalX records the plan first through pre-trade planning, with the entry, stop and target set before the order goes in. When the order fills, your broker sync or import attaches the actual trade to the plan so you can compare the planned and actual entry in R. When it does not fill, you can mark the plan as missed instead of deleting it, so the trades you did not get still count when you review the setup. Over enough trades, that shows whether waiting for your price is helping or costing you, which is the kind of question a large enough [sample size](/glossary/sample-size) is needed to answer.
