Bid-Ask Spread
Quick definition
Bid-Ask Spread: The bid-ask spread is the difference between the highest price a buyer is offering (the bid) and the lowest price a seller will accept (the ask). A market buy pays the ask and a market sell receives the bid, so a trade that enters and exits at market gives up the full spread even if the price never moves.
The bid-ask spread is the gap between the two prices that define a market at any moment: the best bid, where you can sell right now, and the best ask, where you can buy right now. It is a trading cost that never shows up on a statement, because it is hidden inside the fill price.
Every trader who uses market orders pays it. For a long-term investor it barely registers. For a day trader with tight stops it can be a bigger cost than the commission, and it is the first thing to check when a strategy that looks profitable on a chart loses money in practice.
How the Bid-Ask Spread Works
A quote has two sides. The bid is the highest price a buyer is currently willing to pay, and the ask (also called the offer) is the lowest price a seller is currently willing to accept. Each comes with a size, the number of shares or contracts available at that price. The midpoint sits halfway between them.
In the quote above:
- The spread is $50.02 − $49.98 = $0.04.
- As a percentage of price, it is $0.04 ÷ $50.00 = 0.08%.
- A market buy of 200 shares fills at $50.02 and costs $10,004. Selling them at market a moment later returns $9,996.
- The round trip loses $8, the full spread on 200 shares, before any commission and without the price moving at all.
That is why the spread is usually described as the cost of immediacy. FINRA describes a market order as the one that "provides the most certainty that your order will be executed," filling "at or near the current bid or ask prices" (FINRA, Understanding Order Types). The spread is what that certainty costs. Relative to the midpoint, each market order pays half of it, and a round trip at market pays all of it.
The Spread in Different Markets
The spread is measured in whatever unit the market quotes in, which makes raw numbers hard to compare across instruments.
| Market | Example quote | Spread | Round-trip cost at market |
|---|---|---|---|
| Liquid stock | $49.98 by $50.02 | $0.04 (0.08%) | $0.04 a share |
| Low-priced stock | $4.95 by $5.05 | $0.10 (2%) | $0.10 a share |
| Index future (ES) | One tick wide | 0.25 points | $12.50 a contract |
| Forex (EUR/USD) | 1.08500 by 1.08510 | 1 pip | $10 per standard lot |
| Option | $1.20 by $1.30 | $0.10 (8%) | $10 a contract (100-share multiplier) |
The option row shows why spreads matter so much in options. Ten cents sounds small, but on a $1.25 option it is 8% of the price, and every round trip at market gives it up.
What the Spread Costs in R
The way to compare spread costs across these markets is the same as for any trading cost: divide the round-trip cost by the trade's dollar risk, its 1R.
| Trade | Round-trip spread cost | Risk (1R) | Spread in R |
|---|---|---|---|
| 1 ES contract, 4-point stop | $12.50 | $200 | 0.06R |
| 1 lot EUR/USD, 10-pip stop | $10 | $100 | 0.10R |
| 200 shares at $50, $1.00 stop | $8 | $200 | 0.04R |
| 2,000 shares at $50, $0.10 stop | $80 | $200 | 0.40R |
The last two rows risk the same $200 on the same stock. The tight-stop version pays ten times the spread cost, because it holds ten times the shares. At 0.4R per round trip, a strategy with a 1R target needs to win 70% of its trades just to break even, using the breakeven formula (1 + 0.4) ÷ (1 + 1). That is how a scalping setup that looks good on a chart can lose money in a live account.
When Spreads Get Wide
Spreads are not fixed. They widen when fewer people are willing to trade or when the price is more uncertain.
- At the open and close. McInish and Wood's study of NYSE stocks found that spreads follow a reverse J shape through the day, highest at the open, narrower through the middle of the session and rising again into the close (McInish and Wood, Journal of Finance, 1992).
- Outside regular hours. FINRA notes that extended-hours sessions have fewer counterparties, so an order may fill partially, not at all, or "not be at a competitive price compared to regular trading hours" (FINRA, Extended-Hours Trading).
- Around news. Liquidity providers tend to widen their quotes before scheduled releases such as earnings or economic data, when the next price is hardest to predict.
- In thin instruments. Small-cap stocks, far out-of-the-money options, minor and exotic currency pairs and small crypto tokens all trade with wider spreads than their liquid counterparts.
The practical point for a trader: the spread you see during a calm midday session is the best case. If your entries cluster in the first minutes after the open, the spread you actually pay is larger. Our pre-market routine guide covers why pre-market quotes behave differently.
How to Pay Less Spread
You cannot remove the spread, but you can choose how much of it you pay.
- Use limit orders where the price matters. A buy limit order resting at the bid does not pay the spread when it fills. The trade-off is that it may not fill at all, and it tends to fill more often on the trades that go against you.
- Avoid market orders in wide markets. If the spread is several ticks wide, a marketable limit order a tick or two through the quote caps the price without giving up much certainty.
- Trade liquid instruments for short-term setups. A one-tick spread on a heavily traded future is a very different cost from a 2% spread on a thin stock.
- Size your stop to the spread. If the round-trip spread is more than about a tenth of your stop distance, the setup needs a wider stop, a bigger target or a different instrument.
Key Takeaways
- The bid-ask spread is the gap between the best bid and the best ask. A market buy pays the ask and a market sell receives the bid.
- A round trip at market gives up the full spread, even if the price does not move.
- Compare spreads as a percentage of price or, better, in R: round-trip spread cost divided by the trade's dollar risk.
- Spreads widen at the open and close, around news, outside regular hours and in thinly traded instruments.
- Tight stops with large size pay the most spread for the same dollar risk.
Common Mistakes
Ignoring the spread because it is not on the statement. Commissions are itemized and the spread is not, so it is easy to undercount. On liquid stocks traded in small size, the spread is often the larger of the two costs.
Backtesting at the last price or the midpoint. A backtest that fills at the chart price skips the spread on every trade. Charge at least half the typical spread on each market entry and exit. Our guide on how to backtest a trading strategy covers realistic costs.
Judging an option by its last trade price. Thinly traded options can show a last price far from the current quote. The bid is what you can actually sell for.
Setting stops inside the spread. Depending on how your broker triggers stops, a stop a few cents below the entry on a wide-spread stock can be set off by the quote alone or by one small trade at the bid. Give the stop room beyond the spread.
Calling the spread slippage. Paying the ask on a market buy is not slippage, it is the spread. Separating the two shows whether the problem is the instrument (a wide market) or the execution (a fast move or an oversized order).
How JournalX Tracks the Bid-Ask Spread
The spread shows up in the gap between the price you planned and the price you got. JournalX captures the plan through pre-trade planning, where you set the entry, stop and target before the trade, and pulls the actual fills from your broker sync or CSV import. Comparing the two in R shows what execution costs you per trade, and filtering by symbol, session or time of day shows whether that cost is concentrated in thin names or in the first minutes after the open. Pair it with your commissions and you have the full cost of every trade, not just the part your broker itemizes.
Frequently asked questions
What is the bid-ask spread?
The bid-ask spread is the gap between the best bid, the highest price any buyer is offering, and the best ask, the lowest price any seller will accept. If a stock is quoted $49.98 bid and $50.02 ask, the spread is four cents.
Who pays the bid-ask spread?
Whoever trades at market pays it. A market buy fills at the ask and a market sell fills at the bid, so a trader who buys and then sells at market loses the full spread on the round trip. A trader whose limit order rests at the bid or ask and gets filled is on the receiving side of it.
How do you calculate the bid-ask spread as a percentage?
Divide the spread by the midpoint price. A $0.04 spread on a stock quoted $49.98 by $50.02 is 0.04 divided by 50.00, or 0.08%. A $0.10 spread on a $5.00 stock is 2%, which is 25 times more expensive in relative terms.
Why is the bid-ask spread wide?
Spreads widen when there are fewer buyers and sellers or more uncertainty. Thinly traded stocks, far out-of-the-money options, minor currency pairs and small crypto tokens tend to have wide spreads, and spreads in most markets are wider at the open, around major news and outside regular trading hours.
Is the bid-ask spread a fee?
It is a cost but not a fee. Nobody bills you for it and it does not appear as a line on your statement. It is built into the fill price of every market order, which is why traders who only look at commissions often underestimate their total trading costs.