The Breakeven Win Rate Table Every Trader Should Know

A breakeven win rate table for every reward-to-risk ratio, with and without costs, plus a heatmap of expectancy so you can see where your trades really sit.
The breakeven win rate answers the first question to ask about any setup: is my win rate high enough for the size of my winners? Neither number means anything alone. A 35% win rate can be a healthy edge or a slow leak, and so can a 65% one. This post puts the answer in two tables and one heatmap, then shows the three ways traders misread them: ignoring costs, using the planned target instead of the realized one, and calling a small sample a win.
The breakeven win rate formula
Measure every trade in R-multiples, where 1R is what you lose when the stop is hit. If your average winner is R times your average loser, then over many trades you break even when:
Breakeven win rate = 1 ÷ (1 + R)
At 2R, that is 1 ÷ 3 = 33.3%. You lose 1R on two trades out of three and make 2R on the third, so you end flat. The R here is your risk-reward ratio turned around (reward over risk), and our breakeven glossary entry covers the same formula for a single trade's price.
The breakeven win rate table, with and without costs
Every trade also pays commissions, fees and slippage. Costs shrink each winner and enlarge each loser, so in R the formula becomes (1 + costs) ÷ (1 + R). A $5 round trip is only 0.02R on a $250 risk, but it is 0.1R on a $50 risk. That is why scalpers with tight stops feel costs far more than swing traders.
| Reward-to-risk | Breakeven, no costs | With 0.05R costs | With 0.1R costs | With 0.2R costs |
|---|---|---|---|---|
| 0.5R | 66.7% | 70.0% | 73.3% | 80.0% |
| 1R | 50.0% | 52.5% | 55.0% | 60.0% |
| 1.5R | 40.0% | 42.0% | 44.0% | 48.0% |
| 2R | 33.3% | 35.0% | 36.7% | 40.0% |
| 3R | 25.0% | 26.3% | 27.5% | 30.0% |
| 4R | 20.0% | 21.0% | 22.0% | 24.0% |
| 5R | 16.7% | 17.5% | 18.3% | 20.0% |
Costs hurt the left side of the table most. At 0.5R, 0.1R of costs adds 6.6 points to the breakeven. At 4R it adds only 2 points. A strategy built on small, frequent winners has much less room for fees than one built on large ones.
Breakeven win rate heatmap: expectancy for every combination
Breakeven is only the dividing line. To see how much each combination earns, compute expectancy in R: win rate × average win − loss rate × average loss. The grid below does that for win rates from 20% to 70% and reward-to-risk from 0.5R to 4R, before costs.
| Win rate | 0.5R | 1R | 1.5R | 2R | 3R | 4R |
|---|---|---|---|---|---|---|
| 70% | +0.05R | +0.40R | +0.75R | +1.10R | +1.80R | +2.50R |
| 60% | −0.10R | +0.20R | +0.50R | +0.80R | +1.40R | +2.00R |
| 50% | −0.25R | 0.00R | +0.25R | +0.50R | +1.00R | +1.50R |
| 40% | −0.40R | −0.20R | 0.00R | +0.20R | +0.60R | +1.00R |
| 30% | −0.55R | −0.40R | −0.25R | −0.10R | +0.20R | +0.50R |
| 20% | −0.70R | −0.60R | −0.50R | −0.40R | −0.20R | 0.00R |
Two things stand out. A 70% win rate at 0.5R barely clears zero, which is the trap described in our post on why a 70% win rate can still lose money. And a 30% win rate at 3R earns more per trade than a 60% win rate at 1R. Win rate alone tells you almost nothing about which cell you are in.
Use your realized payoff, not your planned target
The most common misreading is picking a column from the plan. You set a 2R target, so you look at the 2R column, see 33.3%, and feel safe at 40%. But the column that matters is your payoff ratio: average win ÷ average loss, from closed trades.
Say you plan 2R targets, but you cut some winners early, so your average win is 1.4R. Stops fill a little past their level and fees come off every trade, so your average loss is 1.1R. Your realized payoff is 1.4 ÷ 1.1 = 1.27, and your breakeven win rate is 1.1 ÷ (1.4 + 1.1) = 44%.
The same 40% win rate went from +0.20R per trade to −0.10R. Nothing about the setup changed. The gap came from execution, which is why it pays to write down the planned target before entry and compare it with the actual exit on every trade.
Moving the target moves you on two axes
The table makes it look as if widening your target is free: go from 1R to 2R and the breakeven drops from 50% to 33.3%. But a farther take-profit gets hit less often, so you move right and down at the same time.
Suppose a setup wins 52% of the time with a 1R target, which is +0.04R per trade. Widen the target to 2R, and if the win rate falls to 30%, you are at −0.10R. If it only falls to 40%, you are at +0.20R. The table can't tell you which one happens. Only your own trades can, which is why you test a new target on a fresh batch of trades instead of assuming the win rate stays put.
How far above breakeven is enough?
Being above the breakeven line on 30 trades proves very little. A win rate measured on a small sample has a wide margin of error, roughly ±1.96 × √(p × (1 − p) ÷ n) at 95% confidence, the standard confidence interval for a proportion.
Take a fixed 2R target with a 33.3% breakeven:
| Your win rate | Margin over breakeven | Trades before the 95% range clears breakeven |
|---|---|---|
| 40% | 6.7 points | about 210 |
| 45% | 11.7 points | about 70 |
| 50% | 16.7 points | about 35 |
At 100 trades, a 40% win rate has a 95% range of about 30% to 50%, which still includes 33.3%. This assumes your winners and losers stay at a fixed size, as they do with a bracket order. If they vary, you need more trades still. Our post on how many trades you need to judge a strategy works through the same question for expectancy, and the sample size entry has the formulas.
Find your own spot on the table
- Measure every trade in R, after costs. Use the planned stop as 1R and include commissions, fees and slippage in each result.
- Split by setup. One blended win rate can average a strong setup and a losing one into a cell that describes neither.
- Compute realized win rate and payoff ratio for each setup, and look up the breakeven for that payoff.
- Check the margin. If your win rate is within a few points of breakeven, keep collecting trades before you size up.
- Recheck after any change to targets, stops or exits, because a new target puts you on a new row and a new column.
For how this fits with the other numbers on a dashboard, see our list of trading performance metrics worth tracking, and our guide on how to calculate expectancy for doing the math in a spreadsheet.
See your breakeven win rate by setup
JournalX shows win rate, average win and loss in R, and expectancy for every setup, after fees, so you can see which cell of the table each one sits in.
Frequently asked questions
What win rate do you need with a 1:2 risk-reward ratio?
Before costs, a 1:2 risk-reward ratio breaks even at a 33.3 percent win rate, because 1 divided by (1 plus 2) is one third. With 0.1R of commissions and slippage per trade, the breakeven rises to 36.7 percent. You need a win rate comfortably above that, measured over enough trades, before the setup has shown a real edge.
What is the breakeven win rate formula?
The breakeven win rate is 1 divided by (1 plus the reward-to-risk ratio). With costs measured in R, it becomes (1 plus costs) divided by (1 plus the reward-to-risk ratio). Use your realized average win divided by your average loss, not your planned target, for the reward-to-risk number.
Is a 40 percent win rate profitable?
It depends on the size of your winners compared with your losers. A 40 percent win rate breaks even at a 1.5 to 1 payoff, earns 0.2R per trade at 2 to 1 and 0.6R per trade at 3 to 1, all before costs. At a 1 to 1 payoff the same 40 percent loses 0.2R per trade.
How many trades do you need to know if you are above breakeven?
It depends on how far above breakeven you are. With a fixed 2R target, a 40 percent win rate needs roughly 210 trades before the 95 percent range around it stops overlapping the 33.3 percent breakeven. A 45 percent win rate clears it after about 70 trades. The closer you are to breakeven, the more trades it takes.
More articles

Performance & Analytics
Profit Factor vs Expectancy:
Profit factor vs expectancy: both come from the same trades, yet they can rank your setups in opposite order. Here is why they disagree and which to trust.

Performance & Analytics
The Trading Performance Metrics
Trading performance metrics grouped by the question each one answers, from edge to drawdown, sizing and execution. Formulas, good ranges and a worked example.